DIY Alloy Wheel Repair Adhesive Kit General Paint Fix Tool for Car Auto Rim
Easy resistant to 130C.
Added value-vibration, carwash resistant.
Repair kit contains complete accessories, allows you to repair damage and scratch in 30 minutes
Alloy wheel repair kit works on the curb damage,scratches,slight dents, installation damages,
sanding marks and other damage to wheel
1.Preparation: clean the damaged alloy wheel with Alcohol prep pad and remove rough edges and
unevenest around the damaged area.
2.Confirm the repair area. If it is slightly damaged, use wet sandpaper to accommodate the outlines
to repaired surface, and lacquer repair area with alloy silver.
3.If the damage area is large or with dents. Then use the repair adhesive: press out the needed repair
adhesive to a mat. Mix 2 components to a consistent grey mass with spatula provided.
(Finish the mixing within2-4mins)
4.Repair: Fill with the mixed adhesive to overflow the damaged area.Allow it dry for 15mins.
5.Accommodate the outlines: use wet sandpaper to accommodate theoutlines to repaired surface.
If necessary, please repeat step 3 & 4.
6.Lacquering: clean the repair area and apply a thin layer of lacquer by brush.
Skin time of lacquer should be at least 12 hours before using thecar, and full cure will takes 3 days.
1 x 6ml Repair glue
1 x Silver gray paint 5ml (vibration-resistant)
1 × Sanding File
2 x Gloves
2 x Cotton Swabs
2 x Paint Brush
2 x Alcohol prep pads
2 x Plastic spatula
1 x Instruction Manual