Corner Bass Trap 12*12*24cm Sound Studio Foam

Product no.: 100152

In stock
Delivery period: 1 - 10 working days

Product Overview:
 
  • New Corner Bass Trap Foam
  • Made from Imported High Quality Foam
  • Sound-Absorption Foam
  • High density acoustic foam cell structure for maximum noise absorption
  • Helps to flutter echoes and reduce excess reflections and reverberation
  • Improves vocal clarity and acoustics of your room
  • Highly fire retardant
  • Ideal for use in recording studios, home theatres and karaoke room
  • Size & Dimension: 12 cm x 12 cm x 24 cm (4.7 in x 4.7 in x 9.4 in)
  • Each Order Contains: 1 pcs Bass Trap 

 

This New Acoustic Foam is made with High Quality Imported Foam. Sound 

vibrations are broadcast thru the air, causing issues with noise entering and 
exiting your house studio. This sound absorbing Polyurethane foam panel is 
designed to reduce echo within an environment. The Tile Studio Foam 
enhances the sound quality and aesthetics of any recording or listening 
environment.

Why hire a Professional if you can construct a sound-absorbing room in your house 
yourself! For the very best quality, most complete sound-absorption you just need 
this New Acoustic Foam!

 

Applications:

  • Auditoriums
  • Broadcast Studios
  • Computer Rooms
  • Equipment Enclosures/Rooms
  • Gymnasiums
  • Gun Ranges
  • Home Recording Studios
  • Home Theaters
  • Industrial Facilities
  • Professional Theaters
  • Professional Recording Studios
  • Warehousing Facilities 
   
General Installation Tips:
 

Soft Sound Studio Foam is typically surface mounted on the walls within a studio and will improve the overall acoustic performance of the space. It is important that you evenly distribute the panels throughout the room and not cluster in one area. The Studio Foam is a modular pattern - the seams don’t always line up perfectly when butting the pieces end to end, this is explained further below. The Polyurethane foam outlined in these instructions is not a Class A fire rated material and may not be acceptable for commercial environments.

 
Tools Required:
 
  • Straight edge utility knife
  • Tape measure
  • Caulking gun
  • Pencil or chalk line
 
Cutting:
 
  1. Mark the Studio Foam to the appropriate size using the tape measure and marker.
  2. Cut along the line using the utility knife. With the thicker foams, it may take several passes to completely cut the Studio Foam.
  3. An alternate cutting method is to compress the foam along the line marked in Step 1. With the material compressed, it will reduce the number of passes that must be made to completely cut the foam.
 
Installation Method:
 
  1. Lay the Studio Foam out for your specific application - keep in mind that you want the foam evenly distributed throughout the room. Acoustic Foam is a modular design and the seams don’t always line up with the pattern.
  2. Measure any areas that need to be field cut on the foam and make the appropriate cuts (examples would be around beams, doorways, or if a short piece is needed).
  3. After all the pieces have been field cut, put the material back in the appropriate position on the wall or ceiling and lightly mark the bottom and side of where each piece will be lightly with a pencil to ensure straight application.
  4. Glue each piece individually with PL Polyurethane Construction Adhesive. Create a perimeter around the outside of the material staying 1 ½ “ away from the edge. Create an X pattern across the center of the material.
  5. Line the material up with the lines you marked in Step 3 and press firmly against the material compressing the foam. Repeat step for remaining pieces of foam.

Additional product information

Color Heavy Grey

Browse these categories as well: Luthier, Guitar/Bass, Cables & Accessories