Set 2 x Bmw M Power Logo Brake Caliper Sticker Decal
Choose colors to your logo ( See Picture )
Size:
SET 1. Smallest, 33mm width, 1,30in
SET 2. small, 64mm width, 2,5''- ideal for 1-2 piston brake calipers
SET 3. medium, 76mm width, 3''-for 2-4 piston calipers
SET 4. large, 89mm width, 3,5'- for 4-6 piston calipers
SET 5. XL, 102mm width, 4''- for 6-8 piston calipers
- Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!
- Tamanho pode afetar o preço!
Fitting Instructions
- Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
- Cut the sheet into individual logos. ( Not individual letters )
- Place a decal face down, rub all over, then peel off the backing ( squared paper ).
- Position the decal in the desired location then rub firmly all over.
- If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.
- Peel off the application paper with care.
- If there are any air bubbles simply prick with a needle and push the air out.
DO NOT wash for at least 24 hours to allow the adhesive to cure.
These are non-genuine parts and are for restoration and replacement purposes only
This is not an original Part.