Set of 2 X Ford GT brake caliper decal sticker fits Ford GT

Choose colors to your logo ( See Picture )

Size: See Pictures

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

Set 2 x Ford Logo Brake Calipers Sticker Decal

Choose colors to your logo ( See Picture )

Size: See Pictures

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

Set 2 x Bmw M Power Logo Brake Caliper Sticker Decal

Choose colors to your logo ( See Picture )

Size:

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

2 KTM Vinyl Sticker

Choose colors to your logo ( See Picture )

Size:

KIT 1: 153,39mm x 47,67mm ( Width x height )

KIT 2: 96,53mm x 30mm ( Width x height )

KIT 3: 300mm x 100mm ( Width x height )

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

4 Seat Sport Door Handle Vinyl Sticker

Choose colors to your logo ( See Picture )

Size: 125mm x 10mm ( Width x height )

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

COOL & EASY! SUPER-THIN!

You can install these on your electric or acoustic guitar and bass
These sticker could cover original dot marks easily.
They are very easy to apply and look incredible on your guitars.
plus they do not affect the playability.
No adhesive is left behind if you peel off the sticker.

MADE IN PORTUGAL

.

You can continue to use lemon oil or spray scrubbing scale once installed.

Set 2 Spiuk Vinyl Logo Stickers

For helmet size M - L

Sticker have no background of any kind. Once applied you will only see the logo. Background will actually be your guitar's headstock

Stickers comes with transparent transfer tape, really easy to apply!

Made in long lasting quality vinyl

Application instructive included. Easy to install: Peel and stick

Dimensions:

see pictures

Choose color in the selection box

For other sizes please contact us.

(Brand names and trademarks are the property of their respective owners. This is for a compatible product NOT an O.E.M product.)

Set 2 Nexion strips Vinyl Stickers

For helmet size M - L

Sticker have no background of any kind. Once applied you will only see the logo. Background will actually be your guitar's headstock

Stickers comes with transparent transfer tape, really easy to apply!

Made in long lasting quality vinyl

Application instructive included. Easy to install: Peel and stick

Dimensions:

see pictures

Choose color in the selection box

For other sizes please contact us.

(Brand names and trademarks are the property of their respective owners. This is for a compatible product NOT an O.E.M product.)

Vinyl Sticker Honda Bold`Or


Measures:

93,62mm x 90,93mm

 

For other colors or sizes contact us.

Honda and BoldÒr are trademarks of Sony.

This product is not a content, sponsored or manufactured by the above company.

This product is manufactured by HMCustom.

Made in Portugal.