Set of 2 X Ford GT brake caliper decal sticker fits Ford GT

Choose colors to your logo ( See Picture )

Size: See Pictures

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

Set 2 x Ford Logo Brake Calipers Sticker Decal

Choose colors to your logo ( See Picture )

Size: See Pictures

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

Set 2 x Bmw M Power Logo Brake Caliper Sticker Decal

Choose colors to your logo ( See Picture )

Size:

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

4 Seat Sport Door Handle Vinyl Sticker

Choose colors to your logo ( See Picture )

Size: 125mm x 10mm ( Width x height )

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

120 Printed labels for cable marking

•      1 A4 sheet contains 24 Printed labels
•      5-sheet minimum order

NOTE: Each custom print will be applied to 120 labels (5 sheets). If you want two names you will have to order 10 sheets, 3 names 15 sheets, etc ...

Send the desired names to the labels in the note box to the seller that is in the shopping cart.

Audi S-line Brake Caliper Decals / Stickers Kit

2x decals per kit

Supplied in 2 colour parts
Made from Superior Quality Cast Vinyl

Self Adhesive,   Easy to Fit,   No Mess !!

Dimensions:

• View images or select in the item selection box.

Color choice

• The selected color will be only for the outer S Line and Square section, the inner square will always be in red.
• See pictures

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

A4 sheet with custom adhesive labels

Measurements:

TAG: 50mm x 22,55 mm

Material: PET / Vinyl

Waterproof

Enter the desired TAG name in the purchase order.

Water resistant stickers.

Ideal for identification in; Bags, Helmets, Bikes, Motorcycles, Guitars, etc ...


Set contains near 20 Vinyl Tag Names.

2 Audi RS 4 Car Brake Caliper trimmed Vinyl Sticker

Choose colors to your logo ( See Picture )

Size: 108,97mm x 27,76mm ( Width x height )

• Cores personalizadas e tamanhos disponíveis mediante solicitação para um ajuste perfeito!

• Tamanho pode afetar o preço!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

2 Audi RS Car Brake Caliper trimmed Vinyl Sticker

Choose colors to your logo ( See Picture )

Size: 74,99mm x 27,76mm ( Width x height )

• Custom colors and sizes available upon request for a perfect fit!
• Size can affect the price!

Fitting Instructions

• Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
• Cut the sheet into individual logos. ( Not individual letters )                                                                  
• Place a decal face down, rub all over, then peel off the backing ( squared paper ).                              
• Position the decal in the desired location then rub firmly all over.                                                          
• If the surface you are applying to is cold, heat with a hairdryer, then rub all over again.                       
• Peel off the application paper with care.                                                                                                
• If there are any air bubbles simply prick with a needle and push the air out.                                        

  These are non-genuine parts and are for restoration and replacement purposes only

This is not an original  Part.

Horse Head Vinyl Sticker

Sticker have no background of any kind. Once applied you will only see the logo. Background will actually be your guitar's headstock

Stickers comes with transparent transfer tape, really easy to apply!

Made in long lasting quality vinyl

Application instructive included. Easy to install: Peel and stick

Dimensions:

• 2 x 120 X 65,17 mm
• 2 x 75 X 40,73 mm

Select the desired width in the selection box

Choose color in the selection box

For other sizes please contact us.